Crème CRM   ›   CRM   ›   Tutoriels   ›   [obsolète] Installation de Crème CRM 1.6 sous Linux

[obsolète] Installation de Crème CRM 1.6 sous Linux
genglert
Modérateur
Inscription : Jun 2011
Messages : 351

#11
31-03-2017, 20:30
En ce qui me concerne Pillow s'installe très bien:

Code :
> mkvirtualenv test_pillow
Running virtualenv with interpreter /usr/bin/python2
New python executable in /home/.../.virtualenvs/test_pillow/bin/python2
Also creating executable in /home/.../.virtualenvs/test_pillow/bin/python
Installing setuptools, pkg_resources, pip, wheel...done.

Puis, dans le même terminal, dans l'environnement "test_pillow":

Code :
> pip install Pillow==3.1
Collecting Pillow==3.1
  Downloading Pillow-3.1.0.tar.gz (9.9MB)
    100% |████████████████████████████████| 9.9MB 128kB/s
Building wheels for collected packages: Pillow
  Running setup.py bdist_wheel for Pillow ... done
  Stored in directory: /home/.../.cache/pip/wheels/fb/56/0f/769ecaf1f73532f679b4907a498a97024024357c601525f852
Successfully built Pillow
Installing collected packages: Pillow
Successfully installed Pillow-3.1.0

(j'ai aussi mis à jour vers la version 3.1.2 avec "pip install -U Pillow==3.1.2")

Arrivez-vous à exécuter avec succès ces 2 commandes ?

Citation :J'ai pris la dernière version

Vous êtres bien conscient que vous allez chercher la version de développement ?
C'est tout à fait possible, et nous nous efforçons de faire que la version de développement fonctionne, mais ça reste une version de développement ; si vous l'utilisez c'est plutôt pour mettre à jour régulièrement (mais si c'est le cas et que vous faites des bugs reports c'est très bien). Notez q'uil y a des petites différences avec la 1.6 pour que cela soit entièrement fonctionnelle, mais ces différences feront l'objet d'un tutoriel pour la 1.7 lorsque celle-ci sortira, dans quelques mois.
Dans tous les cas si c'est pour corriger votre problème ci-dessus avec pillow, c'est sûrement peine perdu (puisque à ce niveau pas de différence).
  Répondre
djin
Inscription : Mar 2017
Messages : 10

#12
03-04-2017, 08:27
L a premiere commande se passe sans probleme :

Code :
administrateur@cremeCRM:~$ mkvirtualenv test_pillow
New python executable in /home/administrateur/Envs/test_pillow/bin/python
Installing setuptools, pip, wheel...done.
virtualenvwrapper.user_scripts creating /home/administrateur/Envs/test_pillow/bin/predeactivate
virtualenvwrapper.user_scripts creating /home/administrateur/Envs/test_pillow/bin/postdeactivate
virtualenvwrapper.user_scripts creating /home/administrateur/Envs/test_pillow/bin/preactivate
virtualenvwrapper.user_scripts creating /home/administrateur/Envs/test_pillow/bin/postactivate
virtualenvwrapper.user_scripts creating /home/administrateur/Envs/test_pillow/bin/get_env_details

Par contre la 2ème pose souci :

Code :
(test_pillow) administrateur@cremeCRM:~$ pip install Pillow==3.1
Collecting Pillow==3.1
  Downloading Pillow-3.1.0.tar.gz (9.9MB)
    100% |████████████████████████████████| 9.9MB 84kB/s
Building wheels for collected packages: Pillow
  Running setup.py bdist_wheel for Pillow ... error
  Complete output from command /home/administrateur/Envs/test_pillow/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-ltJyom/Pillow/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpfp51jzpip-wheel- --python-tag cp27:
  Single threaded build, not installing mp_compile:1 processes
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-2.7
  creating build/lib.linux-x86_64-2.7/PIL
  copying PIL/PalmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageOps.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageFilter.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/Image.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/JpegPresets.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/OleFileIO.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageSequence.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/BufrStubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageTk.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageEnhance.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageMath.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PaletteFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageWin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/TiffTags.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/WebPImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/SunImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageMorph.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/BdfFontFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PcdImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImtImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/_binary.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PyAccess.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageMode.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PsdImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/SpiderImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/McIdasImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/TgaImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PSDraw.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/WalImageFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageColor.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PpmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/__init__.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/BmpImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/_util.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/GbrImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/MpoImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/GribStubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/TiffImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/FliImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PcfFontFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/XVThumbImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageFont.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageChops.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/Hdf5StubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PdfImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/XbmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/XpmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageTransform.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/Jpeg2KImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ExifTags.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PngImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/GifImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/WmfImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/IcnsImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageStat.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/TarIO.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/IcoImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageCms.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/FontFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/MpegImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageDraw2.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/features.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/CurImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PcxImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ContainerIO.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/SgiImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageShow.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/MspImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/GimpGradientFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/EpsImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/PixarImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/GimpPaletteFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImagePalette.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/JpegImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/MicImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/DcxImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/IptcImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImagePath.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageQt.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/GdImageFile.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageDraw.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/ImageGrab.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/FitsStubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  copying PIL/FpxImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
  running egg_info
  writing Pillow.egg-info/PKG-INFO
  writing top-level names to Pillow.egg-info/top_level.txt
  writing dependency_links to Pillow.egg-info/dependency_links.txt
  reading manifest file 'Pillow.egg-info/SOURCES.txt'
  reading manifest template 'MANIFEST.in'
  warning: no previously-included files found matching '.editorconfig'
  writing manifest file 'Pillow.egg-info/SOURCES.txt'
  copying PIL/OleFileIO-README.md -> build/lib.linux-x86_64-2.7/PIL
  running build_ext
  Traceback (most recent call last):
    File "<string>", line 1, in <module>
    File "/tmp/pip-build-ltJyom/Pillow/setup.py", line 767, in <module>
      zip_safe=not debug_build(),
    File "/usr/lib/python2.7/distutils/core.py", line 151, in setup
      dist.run_commands()
    File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
      self.run_command(cmd)
    File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
      cmd_obj.run()
    File "/home/administrateur/Envs/test_pillow/local/lib/python2.7/site-packages/wheel/bdist_wheel.py", line 179, in run
      self.run_command('build')
    File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
      self.distribution.run_command(command)
    File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
      cmd_obj.run()
    File "/usr/lib/python2.7/distutils/command/build.py", line 128, in run
      self.run_command(cmd_name)
    File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
      self.distribution.run_command(command)
    File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
      cmd_obj.run()
    File "/usr/lib/python2.7/distutils/command/build_ext.py", line 337, in run
      self.build_extensions()
    File "/tmp/pip-build-ltJyom/Pillow/setup.py", line 516, in build_extensions
      (f, f))
  ValueError: jpeg is required unless explicitly disabled using --disable-jpeg, aborting

  ----------------------------------------
  Failed building wheel for Pillow
  Running setup.py clean for Pillow
Failed to build Pillow
Installing collected packages: Pillow
  Running setup.py install for Pillow ... error
    Complete output from command /home/administrateur/Envs/test_pillow/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-ltJyom/Pillow/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-tc3CdV-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/administrateur/Envs/test_pillow/include/site/python2.7/Pillow:
    Single threaded build, not installing mp_compile:1 processes
    running install
    running build
    running build_py
    creating build
    creating build/lib.linux-x86_64-2.7
    creating build/lib.linux-x86_64-2.7/PIL
    copying PIL/PalmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageOps.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageFilter.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/Image.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/JpegPresets.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/OleFileIO.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageSequence.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/BufrStubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageTk.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageEnhance.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageMath.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PaletteFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageWin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/TiffTags.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/WebPImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/SunImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageMorph.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/BdfFontFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PcdImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImtImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/_binary.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PyAccess.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageMode.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PsdImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/SpiderImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/McIdasImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/TgaImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PSDraw.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/WalImageFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageColor.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PpmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/__init__.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/BmpImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/_util.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/GbrImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/MpoImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/GribStubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/TiffImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/FliImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PcfFontFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/XVThumbImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageFont.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageChops.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/Hdf5StubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PdfImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/XbmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/XpmImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageTransform.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/Jpeg2KImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ExifTags.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PngImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/GifImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/WmfImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/IcnsImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageStat.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/TarIO.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/IcoImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageCms.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/FontFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/MpegImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageDraw2.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/features.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/CurImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PcxImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ContainerIO.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/SgiImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageShow.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/MspImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/GimpGradientFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/EpsImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/PixarImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/GimpPaletteFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImagePalette.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/JpegImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/MicImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/DcxImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/IptcImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImagePath.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageQt.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/GdImageFile.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageDraw.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/ImageGrab.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/FitsStubImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    copying PIL/FpxImagePlugin.py -> build/lib.linux-x86_64-2.7/PIL
    running egg_info
    writing Pillow.egg-info/PKG-INFO
    writing top-level names to Pillow.egg-info/top_level.txt
    writing dependency_links to Pillow.egg-info/dependency_links.txt
    reading manifest file 'Pillow.egg-info/SOURCES.txt'
    reading manifest template 'MANIFEST.in'
    warning: no previously-included files found matching '.editorconfig'
    writing manifest file 'Pillow.egg-info/SOURCES.txt'
    copying PIL/OleFileIO-README.md -> build/lib.linux-x86_64-2.7/PIL
    running build_ext
    Traceback (most recent call last):
      File "<string>", line 1, in <module>
      File "/tmp/pip-build-ltJyom/Pillow/setup.py", line 767, in <module>
        zip_safe=not debug_build(),
      File "/usr/lib/python2.7/distutils/core.py", line 151, in setup
        dist.run_commands()
      File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
        self.run_command(cmd)
      File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
        cmd_obj.run()
      File "/home/administrateur/Envs/test_pillow/local/lib/python2.7/site-packages/setuptools/command/install.py", line 61, in run
        return orig.install.run(self)
      File "/usr/lib/python2.7/distutils/command/install.py", line 601, in run
        self.run_command('build')
      File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
        cmd_obj.run()
      File "/usr/lib/python2.7/distutils/command/build.py", line 128, in run
        self.run_command(cmd_name)
      File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
        cmd_obj.run()
      File "/usr/lib/python2.7/distutils/command/build_ext.py", line 337, in run
        self.build_extensions()
      File "/tmp/pip-build-ltJyom/Pillow/setup.py", line 516, in build_extensions
        (f, f))
    ValueError: jpeg is required unless explicitly disabled using --disable-jpeg, aborting

    ----------------------------------------
Command "/home/administrateur/Envs/test_pillow/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-ltJyom/Pillow/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-tc3CdV-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/administrateur/Envs/test_pillow/include/site/python2.7/Pillow" failed with error code 1 in /tmp/pip-build-ltJyom/Pillow/

Citation :Vous êtres bien conscient que vous allez chercher la version de développement ?
A non je n'vais pas compris cela, je reprend mon installation du départ avec la version 1.6
Merci la virtualisation Smile
  Répondre
djin
Inscription : Mar 2017
Messages : 10

#13
03-04-2017, 12:44
J'avance Smile

Il manqué ce packet :

Code :
libjpeg-dev
(je l'ai ajouté à mon post précédant)

Du coup j'ai continué avec la BDD
Il manquait juste un FLUSH PRIVILEGES; après
Code :
INSERT INTO user(host,user,password) VALUES ('localhost','cremeuser',PASSWORD('34jkfue1dioaA'));

J'ai créé et rempli le fichier local_settings.py avec mes informations et j'ai eu l'erreur :

Code :
(creme)administrateur@cremeCRM:~/creme_crm-1.6$ python manage.py migrate
Traceback (most recent call last):
  File "manage.py", line 10, in <module>
    execute_from_command_line(sys.argv)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/__init__.py", line 354, in execute_from_command_line
    utility.execute()
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/__init__.py", line 303, in execute
    settings.INSTALLED_APPS
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/conf/__init__.py", line 48, in __getattr__
    self._setup(name)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/conf/__init__.py", line 44, in _setup
    self._wrapped = Settings(settings_module)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/conf/__init__.py", line 92, in __init__
    mod = importlib.import_module(self.SETTINGS_MODULE)
  File "/usr/lib/python2.7/importlib/__init__.py", line 37, in import_module
    __import__(name)
  File "/home/administrateur/creme_crm-1.6/creme/__init__.py", line 92, in <module>
    from mediagenerator.management.commands.generatemedia import Command as GenerateMediaCommand
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/management/commands/generatemedia.py", line 1, in <module>
    from ...api import generate_media
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/api.py", line 1, in <module>
    from . import settings, utils
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/settings.py", line 16, in <module>
    getattr(settings, 'GENERATED_MEDIA_DIR', _media_dir))
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/conf/__init__.py", line 48, in __getattr__
    self._setup(name)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/conf/__init__.py", line 44, in _setup
    self._wrapped = Settings(settings_module)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/conf/__init__.py", line 92, in __init__
    mod = importlib.import_module(self.SETTINGS_MODULE)
  File "/usr/lib/python2.7/importlib/__init__.py", line 37, in import_module
    __import__(name)
  File "/home/administrateur/creme_crm-1.6/creme/settings.py", line 961, in <module>
    from local_settings import *
  File "/home/administrateur/creme_crm-1.6/creme/local_settings.py", line 7
SyntaxError: Non-ASCII character '\xc3' in file /home/administrateur/creme_crm-1.6/creme/local_settings.py on line 7, but no encoding declared; see http://python.org/dev/peps/pep-0263/ for details

Que j'ai réglé en supprimant les commentaires en face de

Code :
'HOST':     '',
        'PORT':     '',

Et j'ai maintenant j'ai l'erreur :

Code :
SystemCheckError: System check identified some issues:

ERRORS:
creme.creme_core: (creme.E002) You did not generate a secret key.
        HINT: Change the SECRET_KEY setting in your local_settings.py/project_settings.py
Use the result of the command "python manage.py build_secret_key".

La commande me donne bien une clé mais je ne sais pas quoi en faire Smile

Merci
  Répondre
genglert
Modérateur
Inscription : Jun 2011
Messages : 351

#14
03-04-2017, 15:24
Merci, j'ai mis à jour le tutoriel pour prendre en compte vos retours, en ce qui concerne le paquet manquant et l'erreur unicode (c'est ma faut j'ai mis des commentaires en français pour le confort des lecteurs et je n'ai pas pensé aux caractères exotiques) ; pour la commande sql des privilèges je verrai plus tard avec mon collègue.


Citation :La commande me donne bien une clé mais je ne sais pas quoi en faire Smile

Vous devez mettre dans votre local_settings.py une ligne du genre SECRET_KEY='....' (telle que vous pouvez en voir dans settings.py) mais en utilisant la clé générée par cette commande.
  Répondre
djin
Inscription : Mar 2017
Messages : 10

#15
04-04-2017, 08:33
Merci a vous Smile

Donc avec le fichier local_setting.py comme ci dessous la commande fonctionne

Code :
DATABASES = {
    'default': {
        'ENGINE':   'django.db.backends.mysql',
        'NAME':     'bdcremecrm',
        'USER':     'cremeuser',
        'PASSWORD': 'MonMotDePasse',
        'HOST':     '',
        'PORT':     '',
    },
}
SECRET_KEY = 'MaCle',

Code :
python manage.py migrate
Par contre Smile sur le commande ci dessous

Code :
python manage.py creme_populate
J'ai l'erreur

Code :
python manage.py creme_populate
/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/utils.py:7: RemovedInDjango19Warning: django.utils.importlib will be removed in Django 1.9.
  from django.utils.importlib import import_module
Disable populate for "vcfs": it does not have any "populate.py" script.
Populate "creme_core" ...
A super-user has been created with login="root" and password="root".
OK
Populate "recurrents" ... OK
Populate "documents" ... OK
Populate "assistants" ... OK
Populate "events" ... OK
Populate "crudity" ... OK
Populate "activesync" ... OK
Populate "persons" ... OK
Populate "creme_config" ... OK
Populate "media_managers" ... OK
Populate "reports" ... OK
Populate "graphs" ... OK
Populate "products" ... OK
Populate "geolocation" ...
Importing Towns database...
OK
Populate "activities" ... OK
Populate "commercial" ... OK
Populate "emails" ... OK
Populate "projects" ... OK
Populate "tickets" ... OK
Populate "billing" ... OK
Populate "opportunities" ... OK
Update sequences for models : ['Language', 'Currency', 'StaffSize', 'EventType', 'Priority', 'Civility', 'TaskStatus', 'Position', 'Status', 'CreditNoteStatus', 'LegalForm', 'ActType', 'FolderCategory', 'ProjectStatus', 'QuoteStatus', 'SettlementTerms', 'InvoiceStatus', 'Status', 'SearchConfigItem', 'Town', 'MediaCategory', 'UserMessagePriority', 'AdditionalInformation', 'Criticity', 'Sector', 'CremeUser', 'SalesOrderStatus', 'PaymentTerms'] OK
Populate is OK.
(creme)administrateur@cremeCRM:~/creme_crm-1.6$ python manage.py generatemedia
/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/utils.py:7: RemovedInDjango19Warning: django.utils.importlib will be removed in Django 1.9.
  from django.utils.importlib import import_module
Generating l10n.js with variation {'language': 'en'}
Traceback (most recent call last):
  File "manage.py", line 10, in <module>
    execute_from_command_line(sys.argv)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/__init__.py", line 354, in execute_from_command_line
    utility.execute()
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/__init__.py", line 346, in execute
    self.fetch_command(subcommand).run_from_argv(self.argv)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/base.py", line 394, in run_from_argv
    self.execute(*args, **cmd_options)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/base.py", line 445, in execute
    output = self.handle(*args, **options)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/django/core/management/base.py", line 661, in handle
    return self.handle_noargs(**options)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/management/commands/generatemedia.py", line 10, in handle_noargs
    generate_media()
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/api.py", line 21, in generate_media
    for key, url, content in backend.get_output():
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/generators/bundles/bundles.py", line 33, in get_output
    variation, combination)
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/generators/bundles/bundles.py", line 72, in generate_file
    output = list(backend.get_output(variation))
  File "/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/filters/yuicompressor.py", line 31, in get_output
    "Error was: %s" % e)
ValueError: Failed to execute Java VM or yuicompressor. Please make sure that you have installed Java and that it's in your PATH and that you've configured YUICOMPRESSOR_PATH in your settings correctly.
Error was: [Errno 2] No such file or directory

Et du coup je n'arrive pas à joindre mon serveur sur http://IPduServeur:8000 pourtant je n'ai pas d'erreur

Code :
(creme)administrateur@cremeCRM:~/creme_crm-1.6$ python manage.py runserver
/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/utils.py:7: RemovedInDjango19Warning: django.utils.importlib will be removed in Django 1.9.
  from django.utils.importlib import import_module
/home/administrateur/Envs/creme/local/lib/python2.7/site-packages/mediagenerator/utils.py:7: RemovedInDjango19Warning: django.utils.importlib will be removed in Django 1.9.
  from django.utils.importlib import import_module
Performing system checks...

System check identified no issues (0 silenced).
April 04, 2017 - 08:25:32
Django version 1.8.17, using settings 'creme.settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.

Je touche presque au but Smile

Merci encore
  Répondre
djin
Inscription : Mar 2017
Messages : 10

#16
04-04-2017, 08:54
Pour l'erreur Java, j'ai installé JAVA :

Code :
apt-get install default-jre

Et les commandes ci dessous sont passées.

Code :
python manage.py creme_populate
Code :
python manage.py generatemedia
Avec juste un erreur sur python manage.py creme_populate

Code :
Disable populate for "vcfs": it does not have any "populate.py" script.

Je lance mon serveur mais je n'affiche rien http://IPduServeur:8000

Sniff Smile
  Répondre
genglert
Modérateur
Inscription : Jun 2011
Messages : 351

#17
04-04-2017, 23:33
Citation :Avec juste un erreur sur python manage.py creme_populate

Ce n'est pas pas une erreur (même si c'est peut-être confusant -- je préciserai dans le tutoriel) ; l'app vcfs n'a pas de script pour initialiser des données en BD, et c'est normal.

Citation :Je lance mon serveur mais je n'affiche rien

Avez-vous lancé votre serveur en lui indiquant l'IP à utiliser ?
https://docs.djangoproject.com/en/1.8/r ... dress-port
  Répondre
djin
Inscription : Mar 2017
Messages : 10

#18
05-04-2017, 15:25
Ça fonction Smile

C'est bôôôôôôô

Merci encore et j’espère que mon expérience va aider les autres utilisateurs également.

Juste une dernière question, peut être hors sujet d'ailleurs ...
Existe t'il un manuel d'utilisation ou le guide du débutant de Crème CRM ?

Merci encore
  Répondre
genglert
Modérateur
Inscription : Jun 2011
Messages : 351

#19
05-04-2017, 23:04
Citation :Existe t'il un manuel d'utilisation ou le guide du débutant de Crème CRM ?

Il y a des PDFs dans les sources, à la racine, dans le répertoire doc/ qui expliquent les bases de l'interface.
Ici mon collègue a écrit quelques billets généraux sur la relation client: https://www.cremecrm.com/forum/forumdisplay.php?fid=4
Ici on trouve des billets présentant quelques fonctionnalités (mais c'est sommaire): https://www.cremecrm.com/forum/forumdisplay.php?fid=14

C'est loin d'être parfait mais j'espère que ça vous aidera.
  Répondre


Atteindre :


Utilisateur(s) parcourant ce sujet : 2 visiteur(s)